Skip to content
Welcomed
Menu

Help · Photo booth

Using an iPad as your photo booth

Everything you need to set up an iPad, light it well, and fix the usual snags. Setup takes about 5 minutes, and a minute more on the day of your event.

What you need

An iPad

A recent iPad with a front camera. Use Safari to set it up. An iPhone also works for roaming photos.

Good Wi-Fi

The booth uploads every photo, and AI looks need the internet. The test photo should upload in a few seconds. If the venue's Wi-Fi is weak, bring a phone hotspot.

Power

Keep the iPad plugged in all day. Our recommended ring light has USB ports you can try for the iPad, so one outlet could power both. Keep the iPad's own charger handy in case they charge it slowly.

An event with an iPad

Every package includes at least one iPad: Essentials and Plus have 1, Premier has 2. A preview event can try one.

Photos still work without internet. Classic photos are taken and saved on the iPad, then upload once it's back online. AI looks need a connection.

Set it up

Do this a few days early, not at the party.

  1. Add the booth to the Home Screen. Open the booth link in Safari on the iPad, tap Share, then Add to Home Screen. It then fills the whole screen.
  2. Connect your event. Open Photo booth from the Home Screen. The iPad shows a QR code. Point your phone's camera at it and pick your event. No event yet? Your phone walks you through making one. Can't scan? On your phone, open the menu (your initial, top right), then Devices → Pair a device and enter the code under the QR code.
  3. Always allow the camera. The first time the booth asks to use the camera, tap Allow. Then set it to always allow, so it doesn't keep asking (see "Always allow the camera" below).
  4. Check it and lock it. The iPad tests the camera and Wi-Fi. Then turn on Guided Access so guests can't leave the booth: Settings → Accessibility → Guided Access, then triple-click the top button while the booth is open.

On the day: when you get to the venue, open Photo booth and tap I'm at the venue. It checks the venue's Wi-Fi, because it is not the Wi-Fi at your home.

Always allow the camera

We recommend setting the camera to Allow for our site, so the booth asks for camera permission as little as possible. A permission box in the middle of a party is easy to tap wrong, and a guest who taps Don't Allow leaves the booth with no camera.

In Safari

  1. Open Settings, then Apps → Safari → Camera, and choose Allow. This covers every website.
  2. Or for our site only: open the booth in the Safari browser (not the Home Screen icon), tap the aA icon in the address bar, choose Website Settings, set Camera to Allow, and tap Done.

In Bluefy

Tap Allow when Bluefy asks. Then open Settings, go to Apps → Bluefy and make sure Camera is on. If you tapped Don't Allow by mistake, that is where to fix it.

Do this at home, when you run the check, not at the venue. If the booth still asks after you open it from the Home Screen, tap Allow again and let us know through Help.

Stands

The stand matters more than most hosts expect. Guests lean on it, kids bump it, and the iPad sits where everyone can see it.

Height

Put the camera at about chest to eye level for an adult, so people see themselves and their faces fill the frame. An adjustable stand lets you set it for the crowd.

Stability

Look for a wide, steady base, and set the stand against a wall or table. If yours ever wobbles, a sandbag on the base is an easy fix.

A secure holder

Pick a holder that grips the iPad on all sides. For a big or unsupervised event, consider a locking enclosure that holds the iPad securely. Guided Access keeps guests inside the booth, but it doesn't stop anyone from taking the iPad.

Place it against a wall or table

Set the stand with its back to a wall, or tuck it against a table. Guests can't knock it from behind, the cable stays out of the walkway, and the wall gives you a clean background.

Cables and charging

Route the cable down the stand and tape it to the floor so nobody trips. Keep the charger in reach of an outlet.

Floor stand or tabletop? A floor stand suits a crowd. A tabletop stand suits a small party. Mount the iPad with the front camera on top. The camera is a small dot on one edge of the screen, and which edge it's on depends on the iPad. Put that edge on top, whether that means upright or sideways. Our pick is a ring light that comes with its own tripod, described under Lighting. It works as the stand and the light in one. On a tighter budget, there's a lighter stand under Lighting too.

Lighting

Good light does more for a photo than a better camera. These rules cover nearly every room.

  • Light the faces, not the background. The brightest light should hit guests from the front, near the iPad.
  • Keep bright windows and lamps behind the iPad, not behind guests. Backlight turns faces into silhouettes.
  • Soft, slightly above, a little to one side. A ring light or a small LED panel next to the iPad works well. Avoid a bare overhead spotlight, which casts shadows under the eyes.
  • Don't mix warm and cool lights. Pick one kind near the booth.
  • Dark ballroom? Add light at the booth. Dim room light makes photos grainy and AI looks less accurate.
  • Outdoors: choose open shade, not direct sun.
  • Test with the check. Take a photo at the booth before guests arrive and move the light until faces look clear.

Our pick: a plug-in ring light with a stand

We recommend a large ring light that plugs into the wall, so lighting and power are both taken care of. The one we suggest is the MACTREM 22-inch ring light with a 75-inch tripod.

  • Plugs into the wall with a power cord, so there are no batteries to think about.
  • Two USB ports on the light you can try for the iPad. Keep its own charger handy in case they charge it slowly.
  • A tablet holder that fits iPads of every size, from 4 to 12.9 inches.
  • Dimmable, from warm to white light, with a remote.
  • The tripod adjusts from 27 to 75 inches, holds up to 18 pounds, and the kit comes with a carry bag.

It's made for indoor use. Set it to a soft, even brightness, and take a test photo before guests arrive.

A budget option for daytime events

If you don't need extra light, the SAMHOUSING iPad tripod stand costs much less. It has no light and no charging, so it works best for daytime events in a bright room, with a window beside or behind the iPad.

  • Adjusts from about 17 to 65 inches, in four steps.
  • A rotating holder for tablets from 4.5 to 12.9 inches, with a Bluetooth remote.
  • Made of aluminum, so it's light and folds down to about 17 inches long.

Because it's light, set it against a wall or table. If it ever feels unsteady, a sandbag on the base helps, but most hosts don't need one. Run the iPad's charging cable to an outlet and tape it down.

Can a friend help?

Yes, and you don't need to share your password. The easiest way is to set everything up yourself a few days early, then hand your friend a few simple instructions.

Set it up yourself, then hand it off

Pair the iPad and run the check ahead of time. Once it's paired, it stays paired, so your friend never needs a pairing code. If something needs fixing later, you can do it from your phone in Devices, as long as the iPad is online. On the day, they only need to:

  1. Put the iPad on its stand and plug it in
  2. Join the venue's Wi-Fi
  3. Open Photo booth and tap I'm at the venue
  4. Start Guided Access (show them the steps)

To start without the on-site check, they tap Start the booth on the Today's the day screen.

Or a friend sets up the iPad from scratch

Your friend can do all the iPad parts: the Home Screen, Wi-Fi, stand, lighting and Guided Access. The only part that needs you is connecting it to your event, and you can do that from anywhere. Your friend reads you the code the iPad shows under its QR code. On your phone, open the menu (your initial, top right), then Devices → Pair a device, pick the event and enter the code. The code has no time limit, but it changes each time the iPad goes back to its pairing screen, so read out the current one.

A friend minds the booth at the event

Your friend doesn't need access to your account. If they need the booth paused or changed, they call or text you and you do it from Devices.

Questions and fixes

The camera is blocked.

Open the iPad's Settings, go to Apps → Safari → Camera, and choose Allow. Or open the booth in Safari, tap aA, then Website Settings, and set Camera to Allow. In Bluefy or Chrome, look under Apps → Bluefy → Camera or Apps → Chrome → Camera instead. Then tap Test again.

It says it can't reach the internet at the venue.

Venue Wi-Fi often needs a sign-in page. Open Safari on the iPad, finish signing in, then come back and tap Test again. If it's connected but slow, move the iPad closer to the router or switch to your phone's hotspot.

What if there's no Wi-Fi at the venue?

The booth keeps working on what it already loaded. Classic photos are saved on the iPad and upload when the connection is back. AI looks become classic photos, and Find my photo shows nothing. Your phone can't control the iPad until it's back online. Open the booth on Wi-Fi once before the event so it's ready to run offline. To start without the on-site check, tap Start the booth on the Today's the day screen.

Photos are waiting to upload.

Nothing is lost. They upload as soon as the connection is back. Your Devices page (in the menu) shows how many are waiting.

How do I connect the light or check uploads on the iPad?

Open a second tab in the same browser on the iPad and go to your booth link with /device on the end. You'll see what's waiting to upload and can connect the light. Close the tab to go back to the booth.

I scanned the code and my event isn't there.

You probably signed in with a different email than the one you made your event with. Tap "Not you?" and sign in with the right one.

My pairing code stopped working.

The code under the iPad's QR code changes each time the iPad goes back to its pairing screen, so enter the one it shows now. After several wrong codes you have to wait 15 minutes.

How do I move an iPad to another event, or pause the booth from my phone?

Open the menu, then Devices. Each device has Remove from event and a Remote: open or pause the booth, switch Booth or Roaming, run the check, reload its page, or move it to another event. A device you remove from an event stays in your list, so you can put it on another event without scanning again. It keeps its name. Use ⋯ to rename it or remove it from your account.

I opened the link from an email and can't add it to the Home Screen.

Links opened inside Mail, Messages or Instagram can't be added. Tap the compass or ⋯ icon and choose Open in Safari, or copy the link and paste it into Safari.

The screen went to sleep.

Keep the iPad plugged in. In Settings → Display & Brightness → Auto-Lock, choose Never. Guided Access also keeps the booth in front.

A guest left the booth screen.

Turn on Guided Access before guests arrive. To end it, triple-click and enter your Guided Access passcode.

Where should I put the booth?

Against a wall or a table, out of the walkway, near an outlet, with a plain background behind your guests. Put the light in front of guests, not behind them.

People look off to the side in their photos.

The camera is probably on the side or the bottom. Rotate the iPad so the small camera dot is at the top. Ask guests to look at the camera dot, not the screen, for the best photo.

The booth shows old settings.

Open the menu, then Devices, open the device and tap Reload its page. The iPad picks up changes on its start screen, never in the middle of a photo.

Can I use more than one iPad?

Essentials and Plus have 1, Premier has 2. Need more iPads than your package includes? Contact support and we'll help.

Does it work on Android tablets or laptops?

Not yet. We've only tested iPads, and iPhones for roaming photos.

Does the on-site check use AI photo credits?

No. It only tests the upload. A full check with an AI look, run from Devices on your phone, uses 1 credit.

Packing list

  • The iPad, charged, with a long cable and an outlet nearby
  • The stand (optional: a sandbag, if it wobbles)
  • The ring light, its power cord and an extension cord
  • Tape for the cable
  • Your phone, for the hotspot and to connect the iPad to your event
  • Your Guided Access passcode, written down

Questions about your Welcomed booth? We're here to help.

Still stuck? Contact support and tell us what you see. Related: The photo booth on guests' phones.